Satlink WS-6902 DVB-S Spectrum
|
Satellite Meter & Spectrum Analyzer (DVB-S)
|
|
|
|
Satlink WS-6902 DVB-S is an easy Satfinder for DVB-S / Digitales Satellite TV. |
|
Satlink WS-6902 DVB-S had an integrated clour TFT LC Display with 3,5" / 8,9cm. |
|
Satlink WS-6902 DVB-S is excellent for justage Satellite Dishes. |
|
Satlink WS-6902 DVB-S can display TV-Programs for test.
|
|
Satlink WS-6902 DVB-S had an integrated Spectrumanalyzer. |
|
Satlink WS-6902 DVB-S had an integrated Program to calculate Angle of Elevation, Azimuth und Skew.
|
|
|
|
Features: |
|
|
-
Colour TFT LC Display with 3,5" / 8,9cm
-
57 Satellite pre-programed
-
Spectrum Analyzer
-
Satfinderfunction
-
Display of signal strength in dB/µV
-
Automatic and manual Search of DVB-S FTA Programs
-
Receive and Play of DVB-S FTA Programs in Picture und Ton
-
DiSEqC Ver. 1.0, 1.1, 1.2 + USALS
-
Firmwareupdate by serial RS232 Port
-
Modify Transponderlist / Satellitenlist with your PC
-
Intregated LiIon Battery
-
11 Menu sprog: engelsk, tysk, russisk, tyrkisk, fransk, tjekkisk, portugisisk, slovensk, polsk, spansk, italiensk
|
|
|
|
Included in delivery
-
device WS-6902
-
a carrying bag with sunshade
-
a PC connection cable with RS-232- and USB plug (Type A)
-
a car adapter cable 12 V
-
an extern charger
-
an Euro-mains cable
-
a CD with english user manual
|
 |
|
|
|
Technical data: |
|
|
|
LNB/Tuner input: |
Connector: |
F type,male |
|
Frequency range: |
950 MHz - 2150 MHz
|
|
Signal lever: |
-65 dB/µV~-25 dB/µV |
|
LNB supply : |
13/18 V, max 400 mA
|
|
Mode: |
2K, 8K |
|
LNB Control: |
22 KHz
|
|
DiSEqC :
|
Ver. 1.0, 1.1, 1.2 + USALS |
|
|
|
Demodulator: |
Front End: |
QPSK |
|
Symbolrate: |
2 Mbps~45 Mbps
|
|
SCPC and MCPC: |
Yes |
|
Spectrum Analyzer: |
JYes |
|
|
|
System resource: |
Processor: |
32bit processor (200MHz)
|
|
SDRAM: |
16 MB |
|
FLASH: |
2 MB |
|
EEPROM: |
8 KB |
|
|
|
Video decoder: |
MPEG 2
: |
Main Proflie@Main Level
|
|
Data Rate: |
up to 15 Mbits/s |
|
Resolution: |
720 x 576 (PAL), 720 x 480 (NTSC) |
|
Video Format: |
PAL / NTSC / SECAM
|
|
|
|
MPEG Audio: |
MPEG 1 layer 1&2
|
|
|
Typ: |
Mono |
|
Sampling: |
32, 44.1 and 48 KHz
|
|
|
|
|
|
Serial data interface: |
Connector: |
USB Type |
|
|
|
Power supply: |
Li-oN Batteriy: |
1950 mA/h |
|
Supply Voltage: |
12,6 Volt |
|
Charger: |
90 - 240 V / AC - 14,5 V / DC 1 A |
|
|
|
Physical Specification: |
Size: |
9,5 x 15,5 x 4,5 cm |
|
Wight: |
0,5 Kg |
|
|
|
Sample Images: |
|
to zoom klick on the pictures |
|

|
Main Menu:
-
Sat-Search
-
System Setting
-
Spktrum Analyzer
-
Angle Calculation
|
|
|
|
|

|
Satellite Finding
In this menu you have the option to search for single channels or using the display for lining a satellite dish up. Once a signal is found, the bar graph shows the signal strength and quality. In addition C/N, FEC and a.BER (after BER) are displayed. In addition an acoustic signal is represented.
|
|
|
|
|

|
system Setting
-
Change System Language
-
Delete Channels
-
Factory Reset
|
|
|
|
|

|
Spectrum Analyzer
In this menu you can control the transponders over the whole spectrum
-
Changes the sampling-frequency between 4MHz und 16MHz
-
Changes between 13V and 18V (horizontal, vertical)
-
Scrolling the signal-strength-axis vertically
-
marks individual transponders (red triangle); the signal-strength of the transponders shown
|
|
|
|
 |
Angle calculation
After the completion of all values select Angle Calculation:
-
shows the azimuth of the chosen satellite
-
shows the angle of elevation of the chosen sa
-
shows the polarity angle of the chosen satellite
|
|
|
|
 |
Displayed TV-Picture with tone |
Good prices for reseller!
Inquiry here
|