Satlink WS-6908 SE DVB-S FTA

DIGITAL SATELLITE FINDER (DVB-S)

DATV TESTED!

Satlink WS-6908 DVB-S FTA had an integrated clour TFT LC Display with 3,5" / 8,9cm.

Satlink WS-6908 DVB-S FTA can display TV-Programs for test.

Satlink WS-6908 DVB-S FTA can connect to a TV and use as a normal satellite receiver (AV-Output)

Satlink WS-6908 DVB-S FTA can connect with a TV-Camera to use the Meter as a Monitor (AV-Input)

PC Software CTK-DB TOOL

With the PC software "CTK-DB tool" you can edit the transponder / satellite list.

• Satellite & Add Remove
• Transponder Add / Remove

The final lists will be using a USB - memory stick to transfer to the meter.

Satlink Service & Supportforum *** only for our customers ***

In our Service & Support Forum http://www.forum.satlinkmeters.com you can always find the latest news, opinions from other users, a download Database with satellite lists, software updates, and various instructions around all Satlink Meters.

• Colour TFT LC Display with 3,5" / 8,9cm
• Fully DVB Compliant
• DiSEqC & 22kHz Switch Control
• Video format: PAL/NTSC/SECAM
• Live FTA Digital Picture and Sound
• Carrier to Noise Readout
• Bit Error Rate Readout
• Sound  warning prompt locking satellite
• Automatc Channel Scan TV + Radio
• Receive and Play of DVB-S FTA TV Programs in Picture and Tone
• Receive and Play of DVB-S FTA Radio Programs in Ton
• AV in and AV out function
• can connect to a TV and use as a normal satellite receiver
• Software Upgradeable via USB Menory Stick
• Lithium-ion 3000mA Power Battery
• up to 6 hours working time with integrated battery
• only 4 hours loading time
• nonstop working time with extern power supply
• Size: 158x95x45,Very small and portable.Size: 158x95x45,Very small and portable
• 11 Menu languages: English, German, French, Portuguese, Spanish, Italian, Dutch, Russian, Polish, Greek, Slovak

Included in delivery:

• WS-6908
• red Protective rubber cover
• 220V charging adapter
• 12V car charger
• A / V Cable Adapter 3.5 jack to 3x RCA jack
• User manual in English

Main-Menu

following sub-menu items can be selected:

• DVB-S
• DVB-T
• Multimedia
• System Setup

Fast-Search

Quick Search in the menu item you can select a desired satellite to search.

43 satellites are pre-programmed.

The satellite list can be edited with a special computer program and are then loaded with a USB memory stick to the device.

Satellite Scan:

After selecting the desired satellite you get into the search mode.

The following measured values are displayed:

• Satellite position in degrees
• Elevation angle in degrees
• LNB tilt angle in degrees
• signal strength as bars and as a percentage
• Signal quality as a bar and a percentage
• BER / BER Signal strength in dBmV (selection in the system: dBm, dBmV, dBmV)
• S / N Signal to Noise Ratio

Zoom-Function

By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

DISEQC 1.0/1.1

Here you can set the DiSEqC settings and store for up to 4 satellite DiSEqC ports.

DiSEqC motor control:

After selecting a satellite, you can gradually control a DiSEqC motor or with goto-X to a desired point.

The signal strength and quality appears.

Transponder Administration

Here you can add or delete transponders, and editing. The frequency, symbol rate and polarization can be chosen freely.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.

System - Setup:

The system allows the following settings:

• OSD language
• Enter the longitude Enter the latitude
• TV Aspect Ratio
• Measured values (dBm, dBmV or dBmV)
• time zone
• Software update
• Reset to factory settings
• Display the software version

Quick-Find

In the Quick Find menu to select a transponder for search.

Select the country, the desired channel and the bandwidth.

In addition, can be turned on the power supply for active antennas.

Channel Scan

If a signal is received so the following measured values are displayed:

• Signal strength "S" as a percentage and as a bar
• Signal Quality "Q" as a percentage and as a bar
• Bit Error Rate "Ber"
• Signal to Noise Ratio "S/N" in dB
• ***Now also with dBm, dBmV or dBµV Measurements!***

Be carried out to control a channel search. Then can be displayed after exiting the channels found in the search image and sound.

Zoom-Function

By switching in the Quick Seach , the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

Freq-Checking

It is possible to measure five channels simultaneously and the measured values simultaneously display.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.