Satlink WS-6912 SE DVB-S + DVB-S2 8PSK Real Time Spectrum

new version with 3000 mA/h power battery

For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.

Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.

AV Input / Input

The Satlink WS-6912 has an AV input. This input can AV-cameras or other devices that have an AV output. The WS-6902 serves as a monitor.

• SYMBOL RATE 8PSK AND QPSK
• 3.5 Inch High definition TFT LCD Screen which Can show live Channels
• NEC Solution
• Shows both S/N and C/N
• Shows strength and quality readings
• Sound and Light Alarm When Lock Signal
• Shows channel picture
• No shows DVB-S2 MPEG4 HD Channels, only measurement!
• Show numerical reading and bar reading
• Digital Meter for Signal Strength(in numerical & #118alue and picture)
• Easy Satellite Manager ( EDIT, delete and SCAN)
• Edit TP, Frequency, LNB switch, Symbol Rate etc.
• Completely programmable by the user
• Input Frequency 950-2150MHz
• Input Level -65-25dBm
• Input Impedance 75(ohm)
• Auto Calculate Angle of AZ ,EL
• Upgrade S/W by PC
• Easy to carry, size only 9.5cm X 15.5cm X 4.5cm
• DisEqC Control
• 22KHz Control
• Fast Charge LI-ION POWER-Battery (3000mAh), Can Last 4-6 Hours
• Indicator Lights for 13/18 volts
• Indicator lights for 22 KHz
• USB port for software upgrades
• USB software upgrade cable included

included:

• WS-6912
• green rubber carrying case
• 220V charging adapter
• 12V car charger
• Data Cable USB / RS232
• AV cable
• English Manual

Satfinderfunction

The following is shown:

• Satellite
• LNB-Typ
• Frequency / Sysmolrate
• Signal Strength "L" and as a percentage bar
• Signal Quality "Q" as a percentage and as a bar
• Signal Strength "PWR" in B/µV
• Signal to noise ratio "C / N" in dB
• Bit error rate "BER" in dB
• FEC

system Settings

• Selecting Menu Language
• Selection of location-related satellite list
• Delete the stored TV channels
• factory reset
• firmware version
• Stored location coordinates/li>

Spectrum Analyzer

Display of the selected frequency spectrum with DVB-S2 transponder detection

Calculation of azimuth angle and Elevation

After entering the coordinates of location-based data, the calculated angle