Satlink WS-6932 HD DVB-S 1+2 Spectrum Unicable

Digital Satellite Meter & Real Spectrum Analyzer & Unicable (DVB-S+S2 / 8PSK / HD MPEG4)

NEW: UNICABLE-SCR Measurements

Satlink WS-6932 HD is an easy Satfinder for DVB-S + S2 with HD TV-Picture

Satlink WS-6932 HD had an integrated clour TFT LC Display with 3,5" / 8,9cm

Satlink WS-6932 HD is excellent for justage Satellite Dishes

Satlink WS-6932 HD can display Digital and HD TV-Programs for test

Satlink WS-6932 HD can connect to a TV and use as a normal satellite receiver (AV-Output)

Satlink WS-6932 HD can connect with a TV-Camera to use the Meter as a Monitor (AV-Input)

AV-IN & OUTPUT

Satlink WS-6932 HD DVB-S&T can be connected as a standard receiver to a TV. In addition, the device has an AV input. At this, other playback devices or AV surveillance cameras to be connected!

PC Software TOOL

With the PC "software tool" you can edit the transponder / satellite list.

• Satellite & Add Remove
• Transponder Add / Remove

The final lists will be using a USB - memory stick to transfer to the meter.

Satlink Service & Supportforum *** only for our customers ***

In our Service & Support Forum http://www.forum.satlinkmeters.com you can always find the latest news, opinions from other users, a download Database with satellite lists, software updates, and various instructions around all Satlink Meters.

• Frequency range: 950 - 2150 MHz (DVB-S)
• 16:9 color TFT LCD display with 4.5 "/ 11cm diagonal
• Backlit keyboard (burn time 5,10,20 seconds or turn off)
• Flashlight function
• Built-in speaker
• Angle calculation of azimuth, elevation and LNB tilt (after entering the coordination own data)
• Spectrum-Analyzer
• Constellation-diagram
• Display the signal strength in percent and as a bar
• Display of BER
• Display of C / N
• Display of signal level in dBµV
• Unicable SCR measurement
• DiSEqC 1.0 for DiSEqC switches or for multi-switches
• DiSEqC 1.1 for control of 1-8 LNB
• DiSEqC 1.2 motor control
• Automatic Channel Search TV and radio
• Reception and playback of DVB-S + S2 TV programs
• Reception and playback of DVB-S + S2 radio programs
• EPG (electronic program guide)
• Format conversion 4:3 or 16:9
• AV-Output: Using the adapter cable can be connected to the device to the TV and used as normal receiver
• AV-Input:for connecting external devices such as Video-cameras.
• Data transfer via USB memory stick:
  - Firmware Updates
  - Backup your own settings
  - Restore the custom settings
  - save Satellite-lists to edit on a PC
  - Satellite lists again transferred to the device
  - For viewing photos and playing MP3 files from USB memory stick
• Built-in, easily replaceable 3000mA / h LION-Power Battery for 3-6 hours of operation
• and more

6 Menu Languages: German, English, Greek, Slovak, Hungarian, Persian

The following satellites are already pre-loaded:

Included:

• WS-6932
• Green Protective Rubber Cover
• Big Transport Nylon Bag with Shoulder Strap
• 220V Charging Adapter
• 12V Car Charger
• A / V Cable Adapter 3.5 jack to 3x RCA jack
• CD with User manual in English

Main Menu

following sub-menu items can be selected:

• Find satellite
• Spectrum-Analyzer
• Constallation-Diagram
• Satellite-Manager
• Multimedia / software updates and data backup
• system Settings

Sat Search

Satellite Selection menu item is initially selected on the left side of the desired satellite.

Then you change the cursor to the right and select the desired transponder.

44 satellites between 70 ° OST and 30 ° West are included in the database

Sat Search

While the satellite search will display:

• Satellite, LNB type, transponder frequency, symbol rate, polarization
• Search entire satellite or selected Transpoder
• Signal strength and quality in bar and a percentage
• PWR in dBmV
• C / N carrier noise ratio in dB
• BER

Zoom-Function

By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

Signalmonitor

The signal monitor the following measured values are displayed:

• Signal strength in percent
• Signal quality in percent
• BER / BER CN / N ratio
• Signal level in dBm, dBmV or dBmV (can be selected in the system)
• Monitoring / waveform when turning the Dish

UniCable / SCR - Measurements

By selecting the LNB type Unicable SCR can also be measured Uni-Cable-Systems

UniCable / SCR - Measurements

It can be measured Uni-Cable-Systems with 4 or 8 SCR frequencies.

Spectrum Analyzer

Display of the selected frequency spectrum

DVB-S QPSK constellation diagram

Here you can analyze the received signal of DVB-S transponders. The received signal is displayed as a hailstorm.

Display of:

• Symbolrate
• BER
• CN in dB
• Signal strength in dBµV

DVB-S2 8PSK constellation diagram

Here you can analyze the received signal of DVB-S transponders. The received signal is displayed as a hailstorm.

Display of:

• Symbolrate
• BER
• CN in dB
• Signal strength in dBµV

Transponder Administration

Here you can add or delete transponders, and editing. The frequency, symbol rate and polarization can be chosen freely.

There are several search modes:

Satellite: All, including the encrypted or only Free Channels

Transponder: All including the encrypted or only Free Channels

TV Picture

After leaving the menu, go to TV mode.

It is presented in picture and sound.

The aspect ratio can be switched in the system (4:3 / 16:9)

Press the INFO button, opens the program information window. All program information is displayed. Furthermore, this information also to windo image signal control purposes.

Channel list

In TV mode is accessed by pressing the OK button to select the previously stored channels.

Favoriten-Manager

Move your favorite channels into predetermined folders.

EPG

electronic program guide

DiSEqC 1.0

DiSEqC 1.0 allows for maximum multi-feed systems, the control of multi-switches up. 4 LNB..

DiSEqC 1.1

DiSEqC 1.1 allows control of multi-feed systems with special DiSEqC switches for maximum up. 8 LNB

DiSEqC 1.2

DiSEqC 1.2 Motor control allows you to rotate and control DiSEqC motors.

USALS

USALS allows you to control positioners.

Multimedia-Menu

Music: MP3-Player

Video: Videoplayer

Picture: Pictureplayer

Upgrade: Softwareupdates, Backups, Restore of own data and more.

System-Settings

In this menu item to system settings. In addition, here's the coordinates entered (not mandatory), this will be calculated at the correct angle of the satellite search and display.