Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer

NEW: UNICABLE-SCR Measurements

PC Software CTK-DB TOOL

With the PC software "CTK-DB tool" you can edit the transponder / satellite list.

• Satellite & Add Remove
• Transponder Add / Remove

The final lists will be using a USB - memory stick to transfer to the meter.

Satlink Service & Supportforum *** only for our customers ***

In our Service & Support Forum http://www.forum.satlinkmeters.com you can always find the latest news, opinions from other users, a download Database with satellite lists, software updates, and various instructions around all Satlink Meters.

For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.

• COFDM Demodulated
• Frequency range:46-870MHz
• Spectrum-Analyzer
• Level range:40-110dBuV
• Input Resistance:75ohm
• Demodulation:QPSK,16QAM,64QAM
• Test: BER, C/N, FEC Signal Quality and Strength / dBmv, dBµV, dBm
• Multi-Channel Simultaneous Measurement
• Auto Full Frequency Scan
• Auto scan of frequency selected
• Power supply at RFIN:5V/15V/24V*(100mA)

• Input Frequency range:950-2150MHz
• Input Level:-65dbm-25dbm
• Spectrum-Analyzer
• Unicable- SCR Measurements
• DiSEqC 1.0, 1.1, 1.2
• 13V, 18V, 22khz
• Input Resistance:75ohm
• Symbol rate:2Msps-45Msps
• Display the signal strength in percent and as a bar
• Test: BER, C/N, FEC Signal Quality and Strength / dBmv, dBµV, dBm
• Auto search: NIT Search ,Manul Search
• Angle calculation of azimuth, elevation and LNB tilt (after entering the coordination own data)
• LNB power supply :H + 18V + 13V 400mA

• 8 menu languages: English, German, French, Spanish, Italian, Swedish, Australian, New Zealand
• 8.4V/3000mAH POWER Lion battery for real long working-time
• 16:9 color TFT LCD display with 4.5 "/ 11cm diagonal
• Keyboard illumination
• Flashlightfunktion
• AV IN & Output
• Data transfer via USB memory stick:
  - Firmware Updates
  - Backup your own settings
  - Restore the custom settings
  - Satellite and save lists on the PC to edit
  - Satellite lists again transferred to the device
  - For viewing photos and playing MP3 files from USB memory stick
• Power adapter input: AC 90V-240V/50Hz
• Power adapter output: DC 12V/1.5A
• Working time:4-6 hours (full charge)
• Charging time: 5 hours from flat
• Car charger supplied
• Dimension: 210 X 120 X 45mm
• Net weight: 0,5kg

Included in delivery:

• WS-6936
• DVB-T Antenne with Magnet Foot
• yellow Protective rubber cover
• large nylon carry bag with shoulder strap
• 220V charging adapter
• 12V car charger
• A / V Cable Adapter 3.5 jack to 3x RCA jack
• User manual in English

Main-Menu

following sub-menu items can be selected:

• DVB-S
• DVB-T
• Multimedia
• System Setup

Quick Search / satellite selection

Quick Search in the menu item you can select a desired satellite to search.

43 satellites are pre-programmed.

The satellite list can be edited with a special computer program and are then loaded with a USB memory stick to the device.

Satellite Scan:

After selecting the desired satellite you get into the search mode.

The following measured values are displayed:

• Satellite position in degrees
• Elevation angle in degrees
• LNB tilt angle in degrees
• signal strength as bars and as a percentage
• Signal quality as a bar and a percentage
• BER / BER Signal strength in dBmV (selection in the system: dBm, dBmV, dBmV)
• S / N Signal to Noise Ratio

Zoom-Function

By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

DISEQC 1.0/1.1

Here you can set the DiSEqC settings and store for up to 4 satellite DiSEqC ports.

DiSEqC motor control:

After selecting a satellite, you can gradually control a DiSEqC motor or with goto-X to a desired point.

The signal strength and quality appears.

Transponder Administration

Here you can add or delete transponders, and editing. The frequency, symbol rate and polarization can be chosen freely.

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.

System - Setup:

The system allows the following settings:

• OSD language
• Enter the longitude Enter the latitude
• TV Aspect Ratio
• Measured values (dBm, dBmV or dBmV)
• time zone
• Software update
• Reset to factory settings
• Display the software version

Quick-Find

In the Quick Find menu to select a transponder for search.

Select the country, the desired channel and the bandwidth.

In addition, can be turned on the power supply for active antennas.

Channel Scan

If a signal is received so the following measured values are displayed:

• Signal strength "S" as a percentage and as a bar
• Signal Quality "Q" as a percentage and as a bar
• Bit Error Rate "Ber"
• Signal to Noise Ratio "S/N" in dB
• ***Now also with dBm, dBmV or dBµV Measurements!***

Be carried out to control a channel search. Then can be displayed after exiting the channels found in the search image and sound.

Zoom-Function

By switching in the Quick Seach , the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.

Freq-Checking

It is possible to measure five channels simultaneously and the measured values simultaneously display.

Frequency - Spectrumanalyzer

Here you can analyze the received signal. Subtle changes are presented visually.

TV Picture

After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)

Program Informations:

Press the INFO button, opens the program information window.

All program information is displayed.

Furthermore, this information also to windo image signal control purposes.