Satlook Micro+ G2 NIT EasyFind with 7 Menu languages

Satlook Micro+ is a small instrument with functions as easy find, satellite identification & the ability to measure on 2 LNB´s at the same time

• EasyFind satellite identification for faster installations
• Spectrum-analyzer with zoom function
• Analog Measure on two LNB´s at the same time (920-2150 MHz)
• Digital BER, QPSK and S/N-ratio
• 7 Menu Languages for menu / english, german, french, polish, dutch, spain and italy
• Very sensitive, easy to maximize weak and strong signals
• Readout of NIT –gives Satellite-ID and TV/Radio-channel info
• Stores up to 99 memory positions (for satellite tranponders)
• Scan through memory positions (transponders) for easy Sat-ID
• LNB voltage 13/18v. 22 kHz tone switch
• Standard DiSEqC according to level (1.0, 1.1, 1.2)
• 3” LCD with very high resolution
• RS232 for PC-connection and future upgrades
• Built in, rechargeable battery
• Only 1,5 kg complete with carrying-case

Analog

Measure on two LNB´s at the same time (920-2150 MHz).

Digital:

• SIG / Signal
• SNR / Signal Noise
• BER / Bit Error Ratio
• MER / Modulation Error Rate

Spectrum

Spectrum-analyzer with zoom function

EasyFind satellite identification for faster installations.

• Input frequency: 920-2150MHz
• Sat-TV min level in: About 35 dBuV (noise)
• Sat-TV max level in: About 100 dBuV
• Input/output impedance: 75 Ohm, F-connectors

Measuring method (analog):

• Spectrum analyzer / Spectrum with Zoom function
• Signal presentation on LCD -display in
  form of thermometer scales
• Pitch-tone, highest tone on loudspeaker

Measuring method (Digital):

• BER (bit error rate)
• S/N (signal/noise-ratio)
• Constellation (QPSK)
• Max-level: Thermometer scales showing max.
• Maxhold function
• BER, S/N and QPSK showing max.
  
  Satellite-identification:
• Yes, by reading out the NIT in the
  bitstream
• Info about the TV and Radio channels
  
  Memory:
• Up to 99 transponders can be stored
  with name
  
  Memory locks on:
• FEC, Symbol-rate Frecuency, 13/18v,
  22kHz

Memory search:
• The instrument scans the memory
  positions and presents the matching
  transponders

Präsentation:
• On LCD 3”

PC-connection:

• Yes, RS232-output
  
  Power out:
• Yes, 13-18V
  
  22 kHz tone:
• Yes, on/off
  
  DiSEqC:
• Yes, all 1.0 and 1.1. Also Toneburst on/off.
  
  DiSEqC actuator:
• Built in positioner for DiSEqC 1.2, SatScan
  and SatSelect
  
  Battery:
• Rechargable 12v, 3.5amp/hour
  
  Operational:
• About 1-2 hours on a fully charged Battery
  
  
  dimensions: 
  180x140x105 mm / with Nylon carrying-case
   157x130x87 mm / without Nylon carrying-case
  
  Weight:
• 1.5kg incl.battery & carrying case

Accessories:

• SATLOOK MICRO G2
• Nylon carrying-case
• Power-supply of 230V13.5V,1.7A
• Car-charger

SERVICE-Information