The optimal satellite signal meter to test and measure both analog/digital signals(DVB-S2, DVB-S, DSS). Especially, these models give users the capacity to measure MER, BER, EVM, I/Q constellation diagram very easily and correctly, which are very important measurement factors for the satellite broadcasting signal.

• 1680S2 Frequency range : 950MHz ~ 2150MH
• Menu Language: english

• SPECTRUM ANALYZER with ROTATOR CONTROL
• Convenient & quick searching by Project name setting
• I/Q Constellation Diagram (HD Level 8PSK)
• Pre-BER, Post-BER, SNR & MER measurement
• Blind scan for DVB-S, DVB-S2, DSS & TP list
• Easy upload & download new satellite file list
• Data Logger with USB port
• Specturm Analyzer
• Accurate level measurement
• Peak level detection : CODE, LEVEL, OFF
• DiSEqC 1.0/1.1/1.2(Rotator) supporting
• Easy portable & lightweight type
• Li-Poly Battery [1680S2]

• Frequency Range : 950 ~ 2,150MHz
• Frequency Resolution : 0.1MHz
• Level Measurement Range : 20dBuV(-40dBmV) ~ 110dBuV(+50dBmV)
• Level Measurement Resolution : 0.1dB
• Level Measurement Bandwidth : 3~20MHz or AUTO
• Level Measurement Accuracy : ±2.0dB (5~50℃)
• LOCK Range : 25dBuV(-35dBmB) ~ 110dBuV(+50dBmV)
• DVB-S2 QPSK
→1) Symbol Rate : 1 ~ 36Msps
→2) FEC : 1/4, 1/3, 2/5, 3/5, 1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2 8PSK
→1) Symbol Rate : 1 ~ 30Msps
→2) FEC : 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DSS QPSK
→1) Symbol Rate : 20Msps
→2) FEC : 3/4, 5/6, 6/7
MER Range : 5 ~ 20dB
SNR Range
→1)8PSK : 3 ~ 20dB
→2)QPSK : 2 ~ 16dB
BER Range
→1) Pre-BER : 2xE-2 ~ 2xE-8
→2) Post-BER : 2xE-4~ 2xE-9
Spectrum Inversion : Auto
SCAN Mode
→List Scan in programmed lists : Max. 84TP
→Blind Scan (DVB-S, DVB-S2/DSS) : Scanning for SR, FEC, Frequency, Level, SNR
I/Q Constellation Diagram : 8PSK

• Downloading / Uploading with PC : Config Files
• Downloading / Uploading / Printing with PC : MAX. 99 Logger Files & 1 Scanned File

• Output Voltage(±1V): 13V for V/R, 18V for H/L
• Output Current: MAX. 450mA
• Auto Circuity Protection(OVERLOAD) : MAX. 500mA

• Rechargeable Batteries (Built-in)
→Li-Poly, 7.4V 3600mA
• Battery Balance Status Indicator
• Continuous Operating Time in full Charging(Over 8hours)
→Approx. 3.5hr. (based on 100mA LNB supply)
→Approx. 7hr. (without LNB supply)
Main Adapter: DC 12V / 500mA

• Frequency Range : 950 ~ 2,150MHz
• Frequency Resolution : 0.1MHz
• Level Measurement Range : 20dBuV(-40dBmV) ~ 110dBuV(+50dBmB)
• Level Measurement Resolution : 0.1dB
• Level Measurement Bandwidth : 3~20MHz or AUTO
• Level Measurement Accuracy : ±2.0dB (5~50℃)
• Level Units : dB (dBuV,dBmV,dBm) or %

• Size : 94mm W x 47mm D x 190mm H
• Weight : 650g (including battery pack)
• Graphic LCD : 128 x 64 dot MATRIX

• Level Range : 40dBuV ~ 110dBuV
• Measurement Range : 20dBuV ~ 110dBuV
• Span : 120MHz, 240MHz, 600MHz, FULL
• Single/Dual Marker for Level or BW Measurement
• Peck Level Indication : Auto
• Sweep Reverse
• Sweep Rate : 900ms/ 600ms/ 300ms
• Rotator Control in Spectrum Mode.

• User Manual in English
• F-type connector
• Portable Bag with shoulder trap
• USB cable

• Project File : MAX. 56
• LNB Config File : MAX. 70
• SW Config File : MAX. 30
• SW Control : 22KHz, DiSEqC 1.0/1.1/1.2, Dish Legacy
• Sat. File : MAX. 99, 84TP per Sat File, Max. 1368TP
• Rotator Control
• Adjustable LNB & DiSEqC with spectrum measurement

[DVB-S]

• I/Q Constellation (SD level QPSK)
• Digital signal quality confirmation (LNB, C/N, BER, Measurement)
• Spectrum
• Dual sat measurement
• Scan & Data logger
• Satellite file list
• DiSEqC Command list

[DVB-S2]

• Graphic icon style
• I/Q Constellation (HD Level 8PSK)
• Digital signal quality confirmation (LNB, C/N, BER Measurement)
• Spectrum measurement
• Dual SAT measurement
• Scan & Logger
• Satellite file list
• DiSEqC Command list
• USB port setup (Datalogger)
• BER range
• Switch configuration

Satellite Search

during the search the following levels will be displayed:

• Signal Level
• Quality Level

if the correct satellite is found, the following measured values are displayed:

• Signal Level
• Quality Level
• p-BER
• a-BER
• Symbolrate
• FEC

Dualscan

If desired, 2 transponder frequencies are measured simultaneously

during the search, the following levels are displayed:

• Signal Level
• Quality Level

Spectrum Analyzer:

Spectrum display of a selected frequency range